Contact us at: 1-833-425-5288 (GALLAV8) or Gallagheraviationllc@gmail.com
Gallagher Aviation is a proud Tanis Aircraft Products authorized dealer and we use the THP3094-500 cabin heater to heat our Bonanza cabin and avionics before each flight. The Tanis THP3094-500 can be temporarily or permanently installed in your aircraft to fit your needs and is a great way to preheat your cabin utilizing SwitcheOn for remote activation before each flight. This 500W heater pulls a little over 4 amps and works very well with SwitcheOn without exceeding the 15 amp fuse built into SwitcheOn. With cheap ceramic space heaters they typically pull 12-14 amps which is close to exceeding SwitcheOn's electrical capability. This allows you to run engine block heaters or other electrical items with reassurance your SwitcheOn is safe.
Tanis Engine Block Preheaters
|
Click above to purchase one new Tanis TSP4CYL-2925-115 4 Cylinder Engine Heater for 4 cylinder Continental and/or Lycoming Engines 115V. FAA STC # SE03232Ch. This preheat kit contains threated heat elements located in each cylinder assembly, (intake bolt or rocker cover screw replacement) and one pad heat element on the engine crankcase/oil sump/tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. This preheat kit is compatible with all engine monitor systems as the threaded heat elements can replace either a rocker cover screw or intake bolt fasteners. This preheat kit when installed will supply 240 watts with a 2.1 amp draw at 115 volts. * Required Bonding sealant sold separately. Quantity 1, PN: TU02788 Price is $820 plus shipping if applicable. Tanis Cabin HeaterClick above to purchase one new Tanis THP3094-500 cabin heater. Price is $380 plus $15 shipping. Includes Isolation feet and 6 foot long cable for easy use on floor of aircraft. (TPS3129) Note: Extension cord to get to your aircraft or inlet/outlets not included.
Output: 500 watts ± 10% Required power: AC 100-240 Volt – 50/60 Hz Dimensions: 5.9 x 5.7 x 1.8 inches (150 x 145 x 45 mm) Approximate Weight: 1.50 lbs (0.68 Kg) Approximate (Install hardware not included) Heater Lead length: 6 inches (150 mm) Approximate Ratings: UL: 20150703-E239394 TUV RHEINLAND: R 50314338 CE: R 50314338 P.1-4_CE * PMA subcomponent of Tanis STC systems. |
Click above to purchase one new Tanis TSP6CYL-2927-115 6 Cylinder Engine Heater for 6 cylinder Continental, Lycoming, and/or Franklin engines 115V. FAA STC #SE03309CH. This preheat kit contains threaded heat elements located in each cylinder assembly, (intake bolt or rocker cover screw replacement) and two pad heat elements for the engine crankcase/oil sump/oil tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. This preheat kit is compatible with all engine monitor systems as the threaded heat elements can replace either a rocker cover screw or intake bolt fasteners.
This preheat kit when installed will supply 460 watts with a 4.0 amp draw at 115 volts. * Required Bonding sealant sold separately. Quantity 1, PN: TU02788 Price is $1,200 plus shipping if applicable. Cirrus Cabin Heater Kit
Click above to purchase one new Tanis TSF3165 Cirrus Aircraft Cabin Heater Kit for Cirrus SR aircraft. Price is $680 plus $15 shipping. Includes THP3094-001 cabin heater, cable kit, control cable, and thermal control. This kit allows a cabin heater to be permanently installed in SR aircraft that are tied to the aircraft's Tanis engine preheater. The cabin heater provides a 20-30 degree rise in ambient temperature and runs when the engine heater is engaged. It comes equipped with a fixed thermostat that will shut the cabin heater off at 77 degrees F.
Output: 500 watts ± 10% Required power: AC 100-240 Volt – 50/60 Hz Dimensions: 5.9 x 5.7 x 1.8 inches (150 x 145 x 45 mm) Approximate Weight: 1.50 lbs (0.68 Kg) Approximate Ratings: UL: 20150703-E239394 TUV RHEINLAND: R 50314338 CE: R 50314338 P.1-4_CE * PMA subcomponent of Tanis STC systems. |
Cabin Heater Cable Kit
Click above to purchase one new Tanis Cable Kit - AV/Cabin Heater. Price is $150 plus $15 shipping. This kit is intended to be a starting point for the wiring of a AV/Cabin heater into a aircraft that includes a Preheat system already. Modification and additional parts may be required.Includes:
Cabling/wiring with fuse protection (approximately 10 feet continuous length) 2) TCS2598, Socket Connector kit 1) TCP2598, Pin Connector kit Additional Plugs, Receptacles, connectors, cable (22759-182) and firewall pass through available. |
Cabin Heater Thermostat Kit
Click above to purchase one new Tanis TU03238 Thermal Control kit for Avionics/Cabin heater. Price is $210 plus $15 shipping.
Includes: CB911, solvent wipe (surface prep for dual lock) TLP3235, Thermal control – Adjustable (dual lock for mounting) TC03246-A, Control Cable harness TU02847, Cable ties for cable mounting |