E-Z Heat Model 442

Write a Review

E-Z Heat Model 442 Oil Sump Heater

Model Number: Model 442

Availability: In Stock.

Part Number Model 442

Retail Price $178.00

Quantity

Description

Preheating aircraft engines for cold winter operations helps reduce wear on cold engine starts and protect your valuable engine asset. Pre-heating your aircraft engine can be affordably done with the E-Z Heat Aircraft Engine Heater. The E-Z Heat was designed to provide very efficient engine heating for most aircraft engines. The heaters consist of a flexible synthetic pad that easily conforms to the contours of the oil pan. This pad will heat your cold soaked engine 3 to 5 hours prior to flight. It uses 300 watts or less of electricity and is thermostatically controlled, so it can be left on over night or all the time. EZ Heat units utilize 110/120 volts (standard electrical outlet) and can be safely and remotely controlled with your smart phone utilizing our Switcheon Remote Power Control Devices.

The heater is 1/32" thick. which enables the immediate heat transfer from heater to engine. With this new lighted plug (110V models only), you can immediately see if the EZ Heat model is powered on providing heat to your engine. FAA approved for certificated aircraft. End your cold weather starting problems and reduce premature engine wear.

Product Information

Dimensions: 2 1/4" x 13" x 1/32"
Watts: 265
Volts: 120
Amps: 2.2
OHMS: 54
Warranty: 3 Years
Weight: 9 ounces
Engine applicability:

Lycoming IO-360A, IO-360C, IO360-M1A

Document Downloads

Click here to download the EZ Heat Application Guide

Click here to download the EZ Heat Application Guide Installation Notes

Click here to download the EZ Heat Cold Weather Application Tips

Click here to download the EZ Heat FAA Compliance Letter

Click here to download the EZ Heat Model 442 Instructions

Click here to download the EZ Heat Model 442 Cut & Try Templates

E-Z Heat Model 442

Browse Similar Items